All categories

C.E. Smith Gen2 Carbon Fiber Outrigger Poles

0

Gen2 Carbon Fiber Outrigger PolesOur Gen2 Poles are designed to prevent galvanic reactions, a common problem with anything made from carbon fiber, which keeps your poles looking good and performing at its best. The base of the poles are made of solid fiberglass for greater strength and stability.Tap..

$999.99

Hubbell HBL60CM23 Short Cover Yellow Weatherproof

0

Short yellow Seal-Tite cover for weatherproofing HBL47CM20C Insulgrip plug when used with receptacles or connector bodies. Also can be used to weatherproof HBL47CM29C Insulgrip connector body when used with HBL47CM16 flanged inlet. IP44 SUITABILITY...

$874.95

Mastervolt MasterView Easy Control Panel

0

MasterView Easy Control PanelThis touchscreen control panel is easy to read and operate. The grey button turns the display on or off or locks it, while all other functions can be controlled using the touchscreen. The first of three control levels provides a short system overview with all the informa..

$14.06

Rupp 10 Degree Top Gun Mounting Wedge White - Sold Individually

0

10 Degree Top Gun Mounting Wedge White - Sold IndividuallyWhite, Custom molded, high impact polymer wedges offer a 10-degree slant for use with offset mounting plates (17-1502-L23 & 17-1502-R23) or when an offset hole is drilled through a hardtop. This component levels the Top Gun mounting flange ab..

$23.00

Rupp Adjustable Center Rigger Base - Silver

0

Adjustable Center Rigger BaseThis adjustable center rigger mount allows the center rigger pole to be set at various angles that match the line of your outriggers or tower leg. Accepts any center rigger pole with outside diameter of 1.50". Product : RUPP ADJUSTABLE MOUNT CENTER RIGGER HOLDER SILVER..

$397.50

Rupp Classic Top Gun Bolt-In Outrigger Holders

0

Top Gun Bolt-In Radial Bases - PairDesigned for T-Tops, half-towers and other aluminum structures, Top Guns set a new standard for convenience of operation. Easily put your riggers out and bring them in while standing at the console. Product : RUPP CLASSIC TOP GUN BOLT-IN OUTRIGGER HOLDERS RADIA..

$1,200.00

Rupp Custom Halyard Line Stop - Pair

0

Custom Halyard Line Stop - PairPackage of two custom nylon outrigger ball stops, complete with RUPP logo. More durable than cork. Center hole accepts either monofilament or nylon halyard lines. Product : RUPP CUSTOM HALYARD LINE STOP - PAIR Manufacturer : RUPP MARINE Manufacturer Part No : 03-110..

$8.42

Rupp Double Lok-Up Halyard Line Lock w/Bungee

0

Double Lok-Up Halyard Line Lock w/BungeeRupp Lok-Ups are an innovative locking pulley system that locks your halyard lines, keeping your outrigger release clips right where you want them. Double Pulley with 12" military grade bungee for Double Rigging.Robust design that includes the following: Sprin..

$52.00

Rupp Fixed Mount Center Rigger Holder - Silver

0

Fixed Center Rigger BaseThis fixed center rigger mount is a top quality welded assembly, highly polished and anodized to match your vessels tower. Fixed angle set at 21 degrees. Accepts any center rigger pole with outside diameter of 1.50". Product : RUPP FIXED MOUNT CENTER RIGGER HOLDER 27 DEGRE..

$265.00

Rupp Klickers Sportfishing Release Clips - Pair

0

Klickers Sportfishing Clips - PairOur easy-to-use Klickers provide maximum trolling performance for sportfishermen who demand the best. Designed for dragging a wide range of baits and lures this clip offers the smoothest operation under any conditions. Precision designed with a state-of-the-art rele..

$39.00

Rupp Marine Halyard Line Tensioner Thru Gunwale/Fairlead - 2.875"

0

Halyard Line Tensioner Thru Gunwale/Fairlead - 2.875"This Halyard Line Tensioner is a stainless steel fairlead tube that attaches to a stainless mounting bracket that has a jam cleat attached. This allows for an easy installation in the gunwale. The fairlead tubes are available in lengths of 2.875 o..

$135.00

Rupp Nickel Crimp Sleeves 10 Pack

0

Nickel Crimp Sleeves - 10 PackPackage of 10 nickel plated 3/32 crimp sleeves. For use with 400lb monofiliment halyard lines. Product : RUPP NICKEL CRIMP SLEEVES 10 PACK Manufacturer : RUPP MARINE Manufacturer Part No : 03-1104-40 UPC : 784703000146..

$6.25

Rupp Nok-Outs Outrigger Release Clips - Pair

0

Nok-Outs Outrigger Clips - PairThe ultimate high-performance outrigger clip. Tournament proven Nok-Outs with patented roller guides and twin tension adjustments easily pull large or small baits and artificial lures while protecting against line chafing. Easy-to-use, one-hand operation makes Nok-Outs..

$59.00

Rupp Nut, Bolt & Bushing Kit

0

Nut, Bolt & Bushing KitReplace lost and worn out Nuts, Bolts and Bushings. Kit Contains: Enough stainless steel bolts, lock nuts and delrin pieces for a complete pair of Rupp outriggers Product : RUPP NUT BOLT & BUSHING KIT Manufacturer : RUPP MARINE Manufacturer Part No : CA-0033 UPC : 7847030009..

$73.85

Rupp Outrigger Bushing Kit

0

Outrigger Bushing KitReplace lost and worn out sleeves and bushings. Kit Contains: Enough Delrin pieces to re-bush a complete pair of Rupp outriggers Product : RUPP OUTRIGGER BUSHING KIT Manufacturer : RUPP MARINE Manufacturer Part No : CA-0032 UPC : 784703000184..

$31.75

Rupp Replacement Spreader Tips - 4 Pack - Black

0

Replacement Spreader Tips - 4 Pack- BlackFour replacement spreader tips for Rupp outriggers. Bag includes four black Delrin spreader tips complete with o-rings. Product : RUPP REPLACEMENT SPREADER TIPS 4 PACK Manufacturer : RUPP MARINE Manufacturer Part No : 03-1033-AS UPC : 784703000979..

$25.00

Rupp Revolution Top-Gun Bolt-In Outrigger Holders

0

Revolution Top Gun Bolt-In Outrigger Holders - PairThis innovative outrigger base is great for new installations or retrofits on both hard or soft tops. Rupp Revolution Top Gun bases reduce moving parts and offer an efficient and flexible BOLT-IN design that improves durability while reducing cost. ..

$1,400.00

Rupp Rod Holder Gunwale Outrigger Bases f/1.5" Poles

0

Rod Holder Gunwale Outrigger Bases - PairThis Rupp RH-500 Rod Holder Mounted Outrigger Bases accept any 1.5" OD Outrigger pole and mount into any standard sized rod holder. The built-in rod holder on the outrigger base makes using this system a breeze. No alterations needed to your boat, if you have..

$636.00

Rupp Sidekick Outrigger Bases - Pair

0

Sidekick Outrigger Bases - PairEasy Out... Easy In Easy to operate, tough and dependable, Rupp Sidekicks are the perfect open boat outrigger. Cold-drawn, forged aluminum for strength and durability. Thoughtful design features engineered for convenience with brightly polished and finished components...

$1,537.00

Rupp Single Lok-Up Halyard Line Lock w/Bungee

0

Single Lok-Up Halyard Line Lock w/BungeeRupp Lok-Ups are an innovative locking pulley system that locks your halyard lines, keeping your outrigger release clips right where you want them. Single Pulley with 12" for Single Rigging.Robust design that includes the following: Spring loaded trigger for p..

$35.00

Rupp Top Gun Backing Plate w/2.4" Hole - Sold Individually, 2 Required

0

Top Gun Backing PlateSecure your new Top Guns with custom-designed backing plates made of anodized aircraft aluminum. These backing plates work with any bolt-in Top Gun or Z-30 outrigger bases. Needed when top thickness is not sufficient to support outrigger bases. Sold individually - 2 required. P..

$59.00

Rupp Triple Lok-Up Halyard Line Lock w/Bungee

0

Triple Lok-Up Halyard Line Lock w/BungeeRupp Lok-Ups are an innovative locking pulley system that locks your halyard lines, keeping your outrigger release clips right where you want them. Triple Pulley with 12" military grade bungee for Triple Rigging.Robust design that includes the following: Sprin..

$71.00

Rupp Z-30 Top Gun Bolt-in Outrigger Holders

0

Top Gun Bolt-In Z-30 Bases - PairAn innovative advance in Top Gun engineering, Rupps Z-30 gear drive system offers unmatched ease of operation for top mount outriggers. Simply turning the palm-size handle deploys and retrieves riggers smoothly and effortlessly with an outstanding 30 to 1 advantage. ..

$1,500.00

Rupp Zip Clips Release Clips - Pair

0

Zip Clips Release Clips - PairA precision instrument for todays fisherman, Rupp Zip Clips provide versatile performance for use with outriggers, downriggers, kites and even flat lines. Zip Clips special tension adjuster allows precise light tackle setting and proven, state-of-the-art design gives fl..

$28.00

TACO Backing Plates f/Grand Slam Outriggers - Anodized Aluminum

0

Backing Plates For Grand Slam Outriggers (pair)Part #: BP-150BSY-320-1Specifically made for additional support for Grand Slam Outriggers when mounting to hard tops and gunnels. Made of Anodized Aluminum. Product : TACO BACKING PLATES FOR GRAND SLAM OUTRIGGERS ANODIZED ALUM Manufacturer : TACO META..

$102.26

TACO Base Reducer From 1-½" to 1-⅛" Poles - Pair

0

Base ReducerGSC-0025 TACOs Outrigger Base Reducer reduces the inner diameter from 1-1/2" to 1-1/8" to accept the 1-1/8" butt end diameter outriggers. Product : TACO BASE REDUCER REDUCES FROM 1-1/2" TO ACCEPT 1-1/8" POLES Manufacturer : TACO METALS Manufacturer Part No : GSC-0025-1 UPC : 630838011..

$139.61

TACO Clamp-On Fixed Angle Stainless Steel Center Rigger

0

Fixed Angle Clamp-On Center Rigger TACO Center Riggers are constructed from 316 marine grade stainless steel. Installation is simplified by the use of a clamp-on mount, that fits either 3/4" IPS and 1" IPS pipe found on the hoop of most standard T-Tops. Uses 1-1/8" mount outrigger. Product : TACO C..

$144.83

TACO Cork Outrigger Line Stops - 1-1/4" (Pair)

0

Cork Outrigger Line Stops - 1-1/4" (Pair)1-1/4" Diameter3/16" Diameter hole for easy riggingDurable Cork material Product : TACO CORK OUTRIGGER LINE STOPS 1 1/4" (PAIR) Manufacturer : TACO METALS Manufacturer Part No : COK-0017-2 UPC : 630838085124..

$7.99

TACO Cork Outrigger Line Stops - 1-3/4" (Pair)

0

Cork Outrigger Line Stops - 1-3/4" (Pair)1-3/4" Diameter3/16" Diameter hole for easy riggingDurable Cork Material Product : TACO CORK OUTRIGGER LINE STOPS 1 3/4" (PAIR) Manufacturer : TACO METALS Manufacturer Part No : COK-0018-2 UPC : 630838085063..

$14.99

TACO Grand Slam 170 Center Rigger 1-⅛" OD

0

Grand Slam 170-2 Center MountUses TACOs spline lock technology for secure outrigger elevationDesigned for use with standard 1-1/8" butt OD outriggersLocks every 18°Derlin bearings and stainless steel internal locking mechanism offer smooth adjustments, secure positioning and prevent movementRugged, ..

$485.79

TACO Grand Slam 170 Outrigger Kit w/Black & Gold Outriggers, Rigging Kit & Caddy

0

Grand Slam 170 Outrigger Kit with Black & Gold 15 Outriggers, Rigging Kit & Line CaddyFeatures:Exclusive Twist-n-Lock rotator collar locks-in 12 fishing positions with a simple 1/4 turnDelrin bearings and internal locking mechanism offer smooth adjustments, secure positioning and prevent movementRug..

$1,695.42

TACO Grand Slam 170 Outrigger Top Mounts - 1-1/8" (Pair)

0

Grand Slam 170 Outrigger Top Mounts - 1-1/8" (Pair)Features:Exclusive Twist-n-Lock rotator collar locks-in 12 fishing positions with a simple 1/4 turnDelrin bearings and internal locking mechanism offer smooth adjustments, secure positioning and prevent movementRugged, sure-grip knob adjusts and loc..

$947.11

TACO Grand Slam 280 Outrigger Mounts

0

Grand Slam 280 Outrigger Top MountThe GS-280 is the 4th generation of the top mount that sets the standard in the industry. Its rugged design will provide years of reliable service even in the most challenging saltwater applications. The redesigned locking head provides secure outrigger height posit..

$1,655.68

TACO Grand Slam 280 Outrigger Mounts w/Offset Handle

0

Grand Slam 2801 Outrigger Top MountThe GS-2801 is the 4th generation of the top mount that sets the standard in the industry. Its rugged design will provide years of reliable service even in the most challenging saltwater applications. The redesigned locking head provides secure outrigger height pos..

$1,669.54

TACO Grand Slam 380 Outrigger Mounts w/Offset Handle

0

Grand Slam 380 Outrigger Top Mounts The GS-380 is the 3rd generation of the popular 300 series of Grand Slam brand outrigger top mounts that adjust all outrigger movements safely from under the top. Its rugged design will provide years of reliable service even in the most challenging saltwater appli..

$3,031.56

TACO Outrigger Glass Rings (Pair)

0

Outrigger Glass Rings (Pair)Smooth, solid glass ringIdeal for Outrigger lines1-3/4" Outside Diameter7/8" Inside Diameter2-Pack Product : TACO OUTRIGGER GLASS RINGS (PAIR) Manufacturer : TACO METALS Manufacturer Part No : COK-0004G-2 UPC : 630838085131..

$9.99

Showing 1 to 36 of 213 (6 Pages)