All categories

Airmar 117WR-1 Crows Foot Transducer Wrench

0

117WR-1 Crows Foot Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They can easily be bent or modified to accommodate c..

$29.95

Airmar 117WR-2 Transducer Hull Nut Wrench

0

117WR-2 Transducer Hull Nut WrenchA single-handed wrench to tighten the hull nut on 2" bronze and stainless steel housings.You can use wrench 117WR-4 to brace the housing when using this wrench.For use with:B117 B150 B744V B744VL B765C SS555 Product : AIRMAR TRANSDUCER WRENCH B117 B150 B744V B744VL..

$35.00

Airmar 117WR-3 Double Handle Transducer Wrench

0

117WR-3 Double Handle Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They can easily be bent or modified to accommodat..

$67.50

Airmar 117WR-4 Transducer Housing Wrench

0

117WR-4 Transducer Housing WrenchA single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the side of the housing to facilitate tightening of the hull nut. For 2" bronze and stainless steel housings (P617V, B617V, SS617V).Use wrench 117WR-2 or 117WR-3 for the hull nut.*..

$29.95

Airmar 164WR-1 Crows Foot Transducer Wrench

0

164WR-1 Crows Foot Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They can easily be bent or modified to accommodate c..

$50.00

Airmar 164WR-2 Transducer Hull Nut Wrench

0

164WR-2 Transducer Hull Nut WrenchA single-handed wrench to tighten the hull nut on B164, SS164 and SS264 housings.You can use wrench 164WR-4 to brace the housing when using this wrench.For use with:B164SS164SS264 Product : AIRMAR TRANSDUCER WRENCH B164 SS164 B175C SS264 Manufacturer : AIRMAR Manuf..

$68.00

Airmar 164WR-3 Double Handle Transducer Wrench

0

164WR-3 Double Handle Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They can easily be bent or modified to accommodat..

$84.00

Airmar 175WR-4 Transducer Housing Wrench

0

175WR-4 Transducer Housing WrenchA single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the top of the housing to facilitate tightening of the hull nut. Use wrench 164WR-2 or 164WR-3 for the hull nut.For use with:B164B175SS164SS264IMPORTANT: the design of the housing..

$35.00

Airmar 60WR-1 Crows Foot Transducer Wrench

0

60WR-1 Crows Foot Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They can easily be bent or modified to accommodate ch..

$29.95

Airmar 60WR-2 Transducer Hull Nut Wrench

0

60WR-2 Transducer Hull Nut WrenchA single-handed wrench to tighten the hull nut on 2" bronze and stainless steel housings. You can use wrench 60WR-4 to brace the housing when using this wrench.For use with:B60SS60 Product : AIRMAR TRANSDUCER WRENCH B60 SS60 Manufacturer : AIRMAR Manufacturer Part N..

$54.00

Airmar 60WR-3 Double Handle Transducer Wrench

0

60WR-3 Double Handle Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They can easily be bent or modified to accommodate..

$68.00

Airmar 60WR-4 Transducer Housing Wrench

0

60WR-4 Transducer Housing WrenchA single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the side of the housing to facilitate tightening of the hull nut.Use wrench 60WR-2 or 60WR-3 for the hull nut.For use with:B60SS60 Product : AIRMAR WRENCH F/ B60 SS60 Manufacturer ..

$33.95

Airmar 75WR-1 Crows Foot Transducer Wrench

0

75WR-1 Crows Foot Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They can easily be bent or modified to accommodate ch..

$30.95

Airmar 75WR-2 Transducer Hull Nut Wrench

0

75WR-2 Transducer Hull Nut WrenchA single-handed wrench to tighten the hull nut on bronze and stainless steel housings. You can use wrench 75WR-4 to brace the housing when using this wrench.For use with:B75SS75 Product : AIRMAR TRANSDUCER WRENCH B75 SS75 Manufacturer : AIRMAR Manufacturer Part No ..

$54.00

Airmar 75WR-3 Double Handle Transducer Wrench

0

75WR-3 Double Handle Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They can easily be bent or modified to accommodate..

$68.00

Airmar 75WR-4 Transducer Housing Wrench

0

75WR-4 Transducer Housing WrenchA single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the side of the housing to facilitate tightening of the hull nut. Use wrench 75WR-2 or 75WR-3 for the hull nut.For use with:B75SS75 Product : AIRMAR WRENCH F/ B75 SS75 Manufacture..

$48.00

Airmar Deadrise Angle Finder - Accuracy of ± 1/2°

0

Deadrise Angle Finder - Accuracy of ± 1/2°Accurate to 1/2 of 1°, this precision instrument, with strong ceramic magnet is designed for attachment to a carpenter's square or straight edge to overcome time consuming computation of angles.Features:Quickly measures boat hull deadrise angle.Ball Bearing ..

$34.99

Airmar P66 Transom Mounting Bracket - 2004 & Up

0

Transom Mounting Bracket for P66 Transducer - 2004 & up Product : AIRMAR P66 TRANSOM MOUNTING BRACKET NEW STYLE (2004&NEWER) Manufacturer : AIRMAR Manufacturer Part No : 33-479-01 UPC : 3347901..

$44.00

Clipper 7m Depth Transducer Extension Cable

0

7m Depth Transducer Extension CableSpare 150kHz depth transducer with 7 meter cable. Product : CLIPPER 7M DEPTH TRANSDUCER EXTENSION CABLE Manufacturer : CLIPPER Manufacturer Part No : CLZ-DX UPC : 610696095213..

$39.00

Deeper Goose Neck Flexible Arm Mount

0

Goose Neck Flexible Arm MountClamp your Deeper to a variety of objects. A universal , 20" (quarter twenty) male screw makes it compatible with RAM mounts and most paddle sport gear.Fixation to Any BoatMounts to all boats and paddle sports gear. Attached Deeper fishfinder completely replaces any stan..

$99.00

Furuno AIR-033-203 Transducer Extension Cable

0

Transducer Extension Cable, 10-Pin(M) to 10-Pin(f), 4 meters Product : FURUNO AIR-033-203 13FT.EXT. 1-10PF TO 1-10PM Manufacturer : FURUNO Manufacturer Part No : AIR-033-203 UPC : 611679103246..

$75.00

Furuno AIR-033-204 Adapter Cable

0

Adapter Cable, 8-Pin Transducer to 10-Pin Sounder Product : FURUNO AIR-033-204 ADAPTER 8 PIN MALE TO 10 PIN FEMALE Manufacturer : FURUNO Manufacturer Part No : AIR-033-204 UPC : 611679103253..

$60.00

Furuno AIR-033-270 Transducer Y-Cable

0

Transducer Y-Cable, 10-Pin (F) to 10-Pin (M) and 6-Pin (M) Product : FURUNO AIR-033-270 YCABLE 1-10PF TO 1-6PM & 1-10PM Manufacturer : FURUNO Manufacturer Part No : AIR-033-270 UPC : 611679224125..

$80.00

Furuno AIR-033-351 Standard Fairing Block

0

AIR-033-351The AIR-033-351 is a standard fairing block for transducers utilizing the Airmar B-45 housing. Product : FURUNO AIR-033-351 STANDARD FAIRING BLOCK F/525T-BSC & BSD Manufacturer : FURUNO Manufacturer Part No : AIR-033-351 UPC : 611679248169..

$30.00

Furuno AIR-033-428 Standard Fairing Block

0

The AIR-033-428 is a standard fairing block for transducers utilizing the Airmar B-744V housing. Product : FURUNO AIR-033-428 F/ B F/ 525ST-MSD /MSC Manufacturer : FURUNO Manufacturer Part No : AIR-033-428 UPC : 611679265661..

$50.00

Furuno Bronze Thru-Hull Stuffing Tube

0

CETHT-9-1Thru-Hull Tube Single Bronze Product : FURUNO BRONZE STUFFING TUBE CETHT-9-1 Manufacturer : FURUNO Manufacturer Part No : CETHT-9-1 UPC : 611679112668..

$55.00

Furuno Transducer Matching Box w/10 Pin Connector

0

MB1100The MB1100 is a matching box for Furuno LCD sounders. It is used to connect a dual-frequency transducer to an appropriate Furuno LCD sounder. The MB1100 comes with a 10-pin connector already supplied, and so does not require the use of a separate pigtail cable assembly. Product : FURUNO MB110..

$350.00

Garmin 10' Transducer Extension Cable w/6-Pin

0

10' Transducer Extension Cable with 6-PinToo much distance between your transducer and fishfinder/sounder? Well, here is 10 feet of cable to bring them together with Garmin's 10 foot Transducer Extension Cable with 6-Pin. Product : GARMIN 10FT EXTENSION CABLE FOR TRANSDUCERS 6 PIN Manufacturer : G..

$69.99

Garmin 12-Pin To Dual 4-Pin Transducer Y-Cable

0

12-Pin To Dual 4-Pin Transducer Y-CableUse this adapter cable when connecting a compatible 12-pin transducer to a compatible 4-pin Garmin device. Product : GARMIN 12 PIN TO DUAL 4 PIN TRANSDUCER Y CABLE Manufacturer : GARMIN Manufacturer Part No : 010-12234-05 UPC : 753759133603..

$29.99

Garmin 20' Extension Cable f/Transducer w/ID - 6-Pin

0

20' Extension Cable for Transducer with ID - 6-PinToo much distance bewtween your transducer and fishfinder/sounder? Here's 20 feet of cable to bring them together. Product : GARMIN 20 FT EXTENSION CABLE FOR TRANSDUCERS 6 PIN Manufacturer : GARMIN Manufacturer Part No : 010-10716-00 UPC : 75375905..

$79.00

Garmin 4-Pin 10' Transducer Extension Cable f/echo™ Series

0

Transducer Extension CableUse this 10' (3M) extension cable to connect your 4-pin transducer to your sonar unit.Compatible Devices:echo™ 100echo™ 150echo™ 200echo™ 300cecho™ 500cecho™ 550c Product : GARMIN TRANSDUCER EXTENSION CABLE 4 PIN 10' F/ ECHO SERIES Manufacturer : GARMIN Manufacturer Part N..

$35.99

Garmin 4-Pin Transducer to 8-Pin Sounder Adapter Cable

0

4-Pin Transducer to 8-Pin Sounder AdapterUse this to connect a Garmin 4-Pin single/dual beam transducer to a Garmin 8-Pin sounder. Product : GARMIN 4 PIN TRANSDUCER TO 8 PIN SOUNDER ADAPTER CABLE Manufacturer : GARMIN Manufacturer Part No : 010-11948-00 UPC : 753759997731..

$19.99

Garmin 6-Pin Female to 8-Pin Male Adapter

0

6-Pin Female to 8-Pin Male AdapterThis adapter allows you to connect newer 8-pin transducers to devices that require a 6-pin connector. Product : GARMIN 6 PIN FEMALE TO MALE 8 PIN ADAPTER Manufacturer : GARMIN Manufacturer Part No : 010-11612-00 UPC : 753759976279..

$16.99

Garmin 8-Pin Female to Wire Block Adapter f/echoMAP™ 50s & 70s, GPSMAP® 4xx, 5xx & 7xx, GSD™ 22 & 24

0

8-Pin Female to Wire Block AdapterGarmin's adapter allows you to connect the wires on legacy 6-pin transducers with newer sonar that requires an 8-pin connection.Compatible Devices:echoMAP™ 50s & 70sGPSMAP® 4xx SeriesGPSMAP® 5xx SeriesGPSMAP® 7xx SeriesGSD™ 24 & 25Plastic Transom Mount Transducer wi..

$69.99

Garmin 8-Pin Transducer Extension Cable - 10'

0

8-Pin Trnasducer Extension Cable- 10'Connect your transducer to your sonar device with this 10'(3M) 8-pin extension cable. Product : GARMIN 8 PIN TRANSDUCER EXTENSION CABLE 10FT Manufacturer : GARMIN Manufacturer Part No : 010-11617-50 UPC : 753759128814..

$39.99

Garmin 8-Pin Transducer Extension Cable - 30'

0

8-Pin Transducer Extension Cable - 30'Connect your transducer to your sonar device with this 30'(9M) 8-pin extension cable. Product : GARMIN 8 PIN TRANSDUCER EXTENSION CABLE 30FT Manufacturer : GARMIN Manufacturer Part No : 010-11617-52 UPC : 753759128838..

$59.99

Showing 1 to 36 of 96 (3 Pages)